Email: [email protected]
Project | Unit | VHMC800 | VHMC1000 |
Work table | |||
Table size | mm | 800x800 | 1000x1000 |
Max load | kg | 1500 | 2000 |
Distance from workbench to vertical head end face | mm | 120-670 | 120-720 |
Distance from the center of the workbench to the end face of the horizontal head | mm | 200-1300 | 200-1500 |
Distance from workbench tothe centerline of the sleeping | mm | 0-600 | 0-700 |
Processing range | |||
Leftand right X | mm | 1000 | 1200 |
Front and rear Z | mm | 1100 | 1300 |
Lying head up and down Y | mm | 600 | 700 |
Vertical head upand down V | mm | 550 | 600 |
Feed drive | |||
Feed rate X/Z/Y/V | m/min | 8 | 8 |
Fastmoving speed X/Z/Y/V | m/min | 16/16/12/17 | 16/16/12/12 |
Spindle | |||
Spindle taper | BT50 | BT50 | |
Spindle speed | rpm | 6000 | 6000 |
Spindle motor power | KW | 15/18.5 | 15/18.5 |
Accuracy | |||
Positioning accuracy | mm | ±0.01/300 | ±0.01/300 |
Repeatpositioning accuracy | mm | ±0.008/300 | ±0.008/300 |
Tool magazine | |||
Tool magazine form | pce | 24 | 24 |
Magazine capacity | sec | 3.5 | 3.5 |
Maximum tool diameter (full tool/blank tool) | mm | 300 | 300 |
Maximum tool length | mm | Φ112 | Φ112 |
Maximum weight of cutter | mm | Φ200 | Φ200 |
Tool change time (tool to tool) | kg | 18 | 18 |